Autex Cube™ is a lightweight semi-rigid panel made
with solid colour throughout, offering design flexibility
need for edging or capping. Cube will help increase privacy in open offices, reduce reverberated sound, and assist in controlling background chatter noise.
Cube is made from polyester (which is recyclable) and manufactured under Autex's ISO 14001 certified Environmental Management System. Cube contains a minimum of 65% post-consumer recycled material (PET bottle-flake).
Cube is a high-density material manufactured from 100% polyester fibres. Cube is therefore completely safe, nontoxic, non-allergenic and non-irritant. Cube is ideally suited for office cube screen manufacture, partition dividers or as a pre-finished acoustic panel.
- Cube is made from 100% polyester fibre without chemical binders
- Manufactured using a minimum of 65% already recycled polyester fibre; made from post-consumer waste
- Design flexibility without the need for edging or capping, created with solid colour throughout
- Excellent acoustic performance
- Highly durable providing long-term stability and performance
- Achieves maximum credits for Green Star projects
- Safe, non-toxic, non-irritant and non-allergenic
- Resistant to fading (refer to -. Fastness to Light')
- Light-weight and easy to handle
- Offers complete design flexibility with our ability to provide custom colour printing
- Manufactured under ISO 9001 and ISO 14001 certified Quality and Environmental Management Systems
Acoustic and pinboard surface for modular office partition panelling.
Display, privacy and noise control when framed for modular room divider.
Framed for freestanding, or direct fix acoustic panel.
Decorative and functional acoustic wall covering for education, retail, and commercial interiors.
|Composition||100% polyester fibre (PET)|
2400mm (+ 10mm) X 1200mm (+ 5mm)
Fastness to Light
Cube is suitable for indoor use only.
Cube has been designed to reduce and control reverberated (echo) noise in building interiors.
|Cube with 6mm air gap||0.10||0.36||0.74||0.95||0.91||0.55|
|Cube with 25mm air gap||0.27||0.61||0.94||0.97||0.85||0.70|
Classification: Group 1-S
Smoke Production Rate: < 5.0m2/s
As required by NZBC C/VM2
9705 - 2003
Classification: Group 1
(SMOGRARC): < 100m2/s2
As required by BCA C1.10
Tested 21 Aug 2012, BRANZ (FI 4974)
Autex polyester has been tested by Cetec Pty Ltd (Report: CV080408) for chemical emission and is classified as low VOC. VOC concentration: 0.01 mgjm3
Cube: RO.40 (@23°C)
Polyester fibre when exposed to an atmosphere of 50°C at 90% relative humidity for four days showed moisture absorption of less than 0.03% by weight. Polyester is not affected by moisture, mould or mildew and will not rot or deteriorate in intended use situations.
Autex is committed to Quality and Environmental
best practice through our ISO 9001 and ISO 14001
certified Quality and Environmental Management
Systems. Cube products contain a minimum of 65%
previously recycled polyester fibre (from PET bottle-flake)
ensuring comparatively low embodied energy. Off-cuts
and manufacturing waste is re-used or recycled wherever
possible. Uncontaminated Cube can be recycled. Cube is manufactured from 100% polyester fibres and does not contain formaldehyde binders. Autex polyester fibres will not become a potential airborne pollutant and will support safer indoor air quality.
Blot spills from fabric quickly. Wipe with a damp cloth. Avoid rubbing and excessive amounts of water as this will affect the fabric finish. Use carpet or upholstery shampoo as directed. Blot with a clean dry cloth after each application of solution.
Non-woven. No pattern repeat but product has directional grain. Product may vary from samples and batch to batch due to fibre blending and lay-up which is an inherent feature of this product.
For further information about Cube or any other Autex products, please contact your local Autex Representative or visit our website.
Cube is a trademark of Autex Industries Ltd. Cube is proudly manufactured in New Zealand by Autex Industries Ltd.
Please tick the colour swatches below to select them. Once you have made your selection you can click on Step 2 to complete your order.
|Aluform Interior Supplies||19 Carrington Street , Queanbeyan, ACT||
Phone 02 6299 5817
Fax 02 6299 5863
|Take Notice Manufacturers Pty Ltd.||158 Beaconsfield St, Milperra , NSW||
Phone 02 9792 4222
Fax 02 9792 4022
|Autex Pty Ltd||16 Bushells Place, Wetherill Park, NSW||
Phone 02 9756 3122
Fax 02 9756 3165
|Leser Build||8 Swan Street, Bega, NSW||
Phone (02) 6492 5385
Fax (02) 6492 2908
|Aluform Interior Supplies||19 Carrington Street , Queanbeyan, NSW||
|Acoustica||6A Nelson St, Annandale, NSW||
Phone 9550 2900
Fax 9550 5665
|Linea Acoustics Pty Ltd||3 Stoddart Road, Prospect, NSW||
Phone 02 9636 3474
Fax 02 9636 3471
|Autex Queensland Pty Limited.||7 - 11 Lancashire Street, Acacia Ridge, QLD||
Phone +61 7 3853 2600
Fax +61 7 3853 2600
|Autex Queensland Pty Limited (North Queensland)||North Queensland, Townsville, QLD||
Phone +61 7 3853 2600
Fax +61 7 3853 2666
|Autex Pty Ltd||166 Bamfield Road, West Heidelberg, VIC||
Phone 03 9457 6700
Fax 03 9457 1020
|Autex Pty Ltd||195 Bank Street, East Vic Park, WA||
Phone 08 9355 1911
Fax 08 9355 1032